AMC 304 og 360 tilsalgs i Sverige 1000 kr + 904 automat

[sten_morten]

Kom over denne på blocket.se.
Jeg vet ingen ting om selger. Men 1000 kr var veldig billig
Så om det er noen her som leter etter AMC V8 kan jo dette være et tips.


http://www.blocket.se/vi/10847107.htm?ca=7_s

[Nico]

Synd det er helt nede i sør Sverige.Billig er det jo , men 304 i jeep blir vel litt lite i en cj7.Tolker det slik at 360 er i deler. Driver å småmyser etter motor til min , men har egentlig ikke bestemt meg for merke , amc vs chevy. valgets kval , hehe. Har 999 kasse i bilen , så sparer jo endel dollar på å putte inn amc maskin.

[Nico]

Han forlanger 3500 sek for 304 maskinen. 360 er solgt.

[Jeepsan]

304 er mer en stort nok i CJ7 og dette er helt klart verdt turen til Sverige.  Ikke lett å få tak i AMC motor som jo tross alt hører hjemme i disse bilene.  Løp og kjøp!

[Nico]

Litt motor info om 304,ikke mye gnell i den ville jeg tro. Har aldri testet bil med slik maskin i selv da , men synes det virker i underkant lite om man har en maskin med 125 hk i en Jeep.


The 304 used from '80-'81 in CJs, J-series pickups, and Wagoneers suffers in performance.

 

AMC 304 V8
Bore x Stroke 3.75" x 3.44"
Displacement 304(4.98L)
Compression Ratio 8.4:1
Horsepower (net) 125@3200
Torque (net) 220@2400
Main Bearings 5
Valve Configuration OHV
Fuel 2bbl
 

 

The '79 304 saw a significant drop in horse power from previous years.

 

AMC 304 V8
Bore x Stroke 3.75" x 3.44"
Displacement 304(4.98L)
Compression Ratio 8.4:1
Horsepower (net) 130@4200
Torque (net) 245@2500
Main Bearings 5
Valve Configuration OHV
Fuel 2bbl
 

 

The 304 used from '72-'78 has the best performance of all the 304s used in the CJ. The 304 was not offered in J-series pickups and Wagoneers after 1972.

 

AMC 304 V8
Bore x Stroke 3.75" x 3.44"
Displacement 304(4.98L)
Compression Ratio 8.4:1
Horsepower (net) 150@4200 Torque (net) 245@2500
Main Bearings 5
Valve Configuration OHV
Fuel 2bbl
 

 

The ratings for the 304 used in '71 J-series pickups and Wagoneers are gross ratings.

 

AMC 304 V8
Bore x Stroke 3.75" x 3.44"
Displacement 304(4.98L)
Compression Ratio 8.4:1
Horsepower (gross) 210@4400
Torque (gross) 300@2600
Main Bearings 5
Valve Configuration OHV
Fuel 2bbl

[Nico]

Her er litt info om 360 amc , der er jo nok av krefter i forhold.


In 1971, the AMC 360 have very high rating. I would assume these are gross ratings and the later are net ratings.

 

AMC 360 V8
Bore x Stroke 4.08" x 3.44"
Displacement 360(5.89L)
Compression Ratio 8.5:1
Horsepower (gross) 245@4400 Torque (gross) 365@2600
Main Bearings 5
Valve Configuration OHV
Fuel 2bbl
 

 

In 1972, the 2bbl 360 is more conservatively rated, presumably these are net ratings.

 

AMC 360 V8
Bore x Stroke 4.08" x 3.44"
Displacement 360(5.89L)
Compression Ratio 8.5:1
Horsepower (net) 175@4000
Torque (net) 285@2400
Main Bearings 5
Valve Configuration OHV
Fuel 2bbl
 

 

In 1973, an optional 4bbl carburetor was available. The horsepower and torque ratings for this version are significantly better.

 

AMC 360 V8
Bore x Stroke 4.08" x 3.44"
Displacement 360(5.89L)
Compression Ratio 8.5:1
Horsepower (net) 195@4400
Torque (net) 295@2900
Main Bearings 5
Valve Configuration OHV
Fuel 4bbl