Har nå fikset navigasjon på SD kort som manglet da jeg fikk radioen tilbake fra Kina etter rep. av volumknapp.
Kjører Igo Primo 2.0 med tomtom kart og fotoboks varsel.
Det irriterte meg at klokka på radioen skiftet til Kina tid GMT+8 hver gang jeg slo på navigasjon. Klokka viste riktig tid i navigasjons programmet, men ikke klokka øverst i radio modus.
Det var ikke noe innstilling for timezone på menyen til spilleren.
La ut en klage på forumet der (sundaybuy.com) og plutselig fikk jeg email fra en kar på support der om at jeg kunne laste ned en firmware oppdatering som fikset problemet med
manglende timezone option på klokke innstillingen :
Hvis noen her trenger denne fix til denne spilleren:
http://www.sundaybuy.com/Car-DVD-player-for-Jeep-Grand-Cherokee-Liberty-Wrangler-with-GPS-Bluetooth-Radio-TV-8243_985.htmlSå legger jeg ut oppskrifta her.
Link til oppgradering her:
http://dl.dropbox.com/u/4468733/B428.rarOppskrift:
1)Prepare a SD card which is in FAT32 format ;
2)release the "B428" rar file ;
3)Copy all the files inside the "B428" rar file after release to the empty FAT32 SD card;
4) Before you turn on the car dvd player ,please insert the FAT32 SD card to GPS slot of car dvd player ;
5)Turn on the car dvd player by Remote control (don't turn on it by the SRC button of front panel) ;
6)After you turn on the car dvd player by remote control ,the DVD screen will show the upgrading ,don't power off when upgrading;
7)About one minute later,there will show the "Calibration screen ",please use the touch pen to complete Calibration;
8)After Calibration,the car dvd player will turn on by itself ,please cilck the "reset" hole in the front panel of car dvd player ;
9)Take out the SD card ,then please turn on the car dvd player again,you can change the time to correct time after you done all these work as above .
2012-01-12
Best regards!
Mr. Jack
Sunday Buy Support Team